Skip to content
Forever Lights - Permanent Roofline Lighting
Close-up of a black aluminum permanent LED track with purple RGB light pucks mounted under an eave
DIY kits · shipped across Canada

Handy? Install it yourself and keep the labour.

The same track, the same RGBW lights and the same app-controlled system we install, boxed as a complete kit with every connector you need. Six sizes from 50 to 250 feet.

  • Everything in one box
  • No cutting or soldering
  • Same 5-year parts warranty
  • Phone support included
1

Pick your kit

Choose the size that covers your roofline and a track colour. Every kit lists exactly what is in the box.

2

Check out securely

Pay by card on Stripe. Shipping and GST/HST for your postal code are shown before you pay.

3

We ship it

Kits leave our Belmont, Ontario shop within one to two business days, with your invoice emailed right away.

Free shipping within 200 km of our Belmont, Ontario shop and a $200 flat rate anywhere else in Canada. Prices are in Canadian dollars, before GST/HST.

The kits

Six sizes, priced by roofline length.

Longer kits cost less per foot, because the controller and the fixed parts are the same whatever the length.

Not sure which size? Draw your lights on a photo with the Light Visualizer, or use the cost estimator to get a roofline length for your home.

Colour matched

Pick a track colour that disappears against your trim.

The aluminum channel is what people see in daylight, so it ships in the colour closest to your soffit and fascia. Standard colours include a box of colour-matched screws. Custom colour orders ship without the screw pack, since the heads are matched to stock colours only.

  • White
  • Black
  • Brown
  • Beige / tan
  • Custom colour match
Aluminum permanent lighting track shown in black, beige, white and brown with RGBW puck lights fitted
What is in the box

Every part, in every kit.

Quantities change with the size of the kit. The parts themselves do not.

Forever Lights 5-Light RGBW Strand supplied in Forever Lights permanent lighting kits

Forever Lights 5-Light RGBW Strand

Five sealed RGBW puck lights on a moulded weatherproof lead. Each puck drops into the track and points down the face of your home.

Aluminum Track, 42 inch with 8 inch spacing supplied in Forever Lights permanent lighting kits

Aluminum Track, 42 inch with 8 inch spacing

Extruded aluminum channel, 42 inches long, pre-drilled on 8 inch centres to hold five pucks per piece.

Forever Lights Power Supply, 150 W supplied in Forever Lights permanent lighting kits

Forever Lights Power Supply, 150 W

12 V 150 W constant-voltage waterproof LED driver with a standard plug end.

1 ft Light Extension Connector supplied in Forever Lights permanent lighting kits

1 ft Light Extension Connector

Short sealed jumper for stepping the run across a corner or a narrow break in the soffit.

5 ft Light Extension Connector supplied in Forever Lights permanent lighting kits

5 ft Light Extension Connector

Mid-length jumper for gaps between runs, such as over a garage door or a window bay.

10 ft Light Extension Connector supplied in Forever Lights permanent lighting kits

10 ft Light Extension Connector

Longer jumper for crossing a wider unlit span without adding pucks.

20 ft Light Extension Connector supplied in Forever Lights permanent lighting kits

20 ft Light Extension Connector

The long jumper, used to reach a separate elevation or carry the run back to the controller.

Power T Connector supplied in Forever Lights permanent lighting kits

Power T Connector

Splits the low-voltage power feed so one supply can push power into two directions.

Light Extension T Connector supplied in Forever Lights permanent lighting kits

Light Extension T Connector

Splits the light run itself, so one controller output can branch left and right from a single start point.

20 ft Power Extension Connector supplied in Forever Lights permanent lighting kits

20 ft Power Extension Connector

Extends the run between a power supply and the point where power is injected into the lights.

Forever Lights Data Amplifier supplied in Forever Lights permanent lighting kits

Forever Lights Data Amplifier

Re-boosts the control signal partway along a long run so the last pucks stay in sync.

Forever Lights WiFi Controller

The brain of the system. Joins your 2.4 GHz WiFi and drives colours, scenes, schedules and zones from the app.

Box of Colour Matched Screws

100 pack of coloured-head screws that disappear against the track.

Kit contents

Exact quantities, kit by kit.

Quantity of each component supplied in each Forever Lights DIY kit size
Component50 ft75 ft100 ft150 ft200 ft250 ft
Forever Lights 5-Light RGBW Strand162431456075
Aluminum Track, 42 inch with 8 inch spacing162431456075
Forever Lights Power Supply, 150 W112233
Forever Lights WiFi Controller111111
1 ft Light Extension Connector222245
5 ft Light Extension Connector111245
10 ft Light Extension Connector—12233
20 ft Light Extension Connector222234
Power T Connector——1122
Light Extension T Connector111122
20 ft Power Extension Connector——1122
Forever Lights Data Amplifier——1122
Box of Colour Matched Screws111222
Kit price (before shipping and tax)$1,455.00$1,709.00$1,989.00$2,579.00$3,049.00$3,629.00
DIY or installed

What you save, and what you take on.

A kit is the same hardware we put on our own installs. What you are taking on is the measuring, the ladder work and the commissioning. On a single-storey home that is a realistic weekend. On a steep two-storey it is the part most people hand back to us.

LengthDIY kitInstalled by usYou save
50 ft$1,455.00$1,665.00$210.00
75 ft$1,709.00$1,785.00$76.00
100 ft$1,989.00$2,129.20$140.20
150 ft$2,579.00$2,840.70$261.70
200 ft$3,049.00$3,448.80$399.80
250 ft$3,629.00$4,157.00$528.00

Installed prices are the low end of our full-service range for the same length and include measuring, mounting, wiring, commissioning and the 1-year workmanship warranty. Kit prices exclude shipping and GST/HST.

Read the full DIY versus professional comparison
Before you order

What you will need to supply.

  • A cordless drill and a driver bit for the screws supplied
  • A ladder or lift you are comfortable and safe working from
  • A GFCI-protected exterior or garage outlet within reach of the run
  • Basic tools: tape measure, chalk line or level, tin snips or a hacksaw for cutting track
  • A helper. Holding a 42 inch track piece flush to a soffit is a two-person job

You are not on your own

Every kit comes with phone support from the same people who install these for a living. Call us mid-install if a run is not lighting or the controller will not pair, and we will talk you through it.

(519) 914-3404
Questions or custom colours

Not ready to order yet? Ask us first.

Standard kits can be ordered and paid for online. For a custom colour match, several kits for one property, or a second opinion on sizing, send your details and you will have a written answer within one business day. Nothing is charged until you agree to it.

A written quote

Kit, shipping and GST/HST, itemised.

5-year parts warranty

The same warranty as our installed systems.

One business day

We reply Monday to Friday, usually the same day.

Ask about a kit

No payment now. We reply within one business day.

Not sure? Tell us your roofline length in the notes and we will confirm the right size.

Track colour

No payment now · We reply within one business day with a written quote

Kit FAQ

Ordering, sizing and installing.

How do I pay for a kit?

Choose a size and track colour, add it to your cart and check out by credit card, debit, Apple Pay or Google Pay on Stripe’s secure page. Kits are invoiced by our billing company, Master Decker Inc., and your invoice is emailed as soon as the payment goes through. For a custom colour match, use the question form and we will quote it.

How much is shipping?

Shipping is free within 200 km of our shop in Belmont, just south of London: most of Southwestern Ontario, Kitchener-Waterloo, Hamilton, Niagara and most of the GTA. Anywhere else in Canada it is a flat $200 per order. Checkout shows which applies as soon as you enter your postal code, and GST or HST for your province is added there too.

Which size do I need?

Measure the rooflines you want lit, in feet, and round up. Our cost estimator will also give you a length if you pick your home size. If you are between sizes, tell us in the notes and we will help you choose. Every kit ships with a little more track than its nominal length to allow for corners and offcuts.

How hard is the install?

If you are comfortable working from a ladder and using a cordless drill, it is a weekend job on a single-storey home. The connectors are sealed twist fittings, so there is no cutting or soldering, and the power supply plugs into an existing GFCI outlet. Two-storey and steep rooflines are where most people decide to have us install it instead.

What warranty comes with a kit?

DIY kits carry the same 5-year parts warranty as our installed systems. The 1-year workmanship warranty applies only where our own crew did the install, since we cannot warranty how a kit was mounted.

Can I add to a kit later?

Yes. The system is modular, so you can extend a run or light another elevation later with more track, strands and connectors. Tell us what you already have and we will quote the add-on parts.

Forever Lights technician installing a permanent LED lighting controller under the soffit of a home
Free site visit · Written quote within 24h

Would you rather we just did it?

Our crew measures, colour-matches the track to your soffit and commissions the whole system in a day, backed by the workmanship warranty.

Monday–Friday, 8:00 AM–5:00 PM · 5-year parts · 1-year labour

Free Quote